SmoothCote™ FiberRod Posts (3/8 in. dia.)
Product Details
Portable inexpensive post that are used as line post on multi-strand fences and as extra support post for netting.
Clip options:
Benefits
Specs
- 3, 4, 5, 6 or 7 ft tall
- 3/8" diameter
- White in color
- An extra UV resistant urethane outer coating to prevent fiberglass splinter
- Pencil-pointed
- Drive Caps (sold separately)
- 20 per package, but priced individually. When ordering, please put in quantities of 20, 40, 60, etc.
Installation
- Attach a Drive Cap (sold separately) and drive the pencil-pointed end into ground with a hammer at designated area. If not using a drive cap use a rubber mallet so as not to create splinters on the post.
- Attach a SnapOn Harp Clip, ScrewOn Rope/Tape Insulator or PowerGrip Clip to the post.
- Insert twine, rope and narrow tape.
Tips
Listed below are recommended optional components or related items. Your particular situation may require alternative recommendations. Please call and talk to our consultants if there are any questions at 800-282-6631.
-
Posts and Accessories
FiberRod Post Driver
Item #321880 -Hand-held post pounder to help drive fiberglass poles into the ground. Steel pipe construction with welded handle fits posts from 3/8" dia. up to 1/2".
$6.80 -
Posts and Accessories
Drive Cap for 3/8" posts, each
Item #321810 -Place over the top of fiberglass rods prior to insertion. Nylon cap reduces damage and increases the lifespan of the post.
$0.61 -
Insulators
ScrewOn Rope/Tape Insulator, each
Item #325400 -For holding rope, twine and narrow tape onto portable electric fence posts.
$0.39 -
Fence Connectors and Accessories
Dead Blow Hammer, orange
Item #205015 -Versatile hammer delivers a controlled impact with minimal vibration and rebound.
$11.00 -
Insulators
PowerGrip Clip, each
Item #325000 -Simple spring metal clip that hold electric fence conductors to 3/8" insulated fence posts.
$0.20 -
Insulators
SnapOn Harp Clip, 3/8", each
Item #325310 -For attaching conductors at desired height on 3/8" fiberglass posts. Design allows conductors in but prevents their escape.
$0.30 -
Insulators
SnapOn Harp Clip Tool
Item #325311 -Aids in the installation of Harp Clip electric fence clips onto 3/8" fiberglass posts.
$1.22
Write a Review
You must be logged in to leave a review. Please sign in.
Paul D from Oklahoma
I have used nearly 500 of these and they last so much longer than the step in posts that you can buy at the local ag store and they are so versatile in being able to adjust wire height. I use the spring clips with them and they make all the difference in the world. I use them with both polywire and 12.5 gauge high tensile wire on my perimeter fence and love them.
Kurt Z from Oklahoma
Posts are smooth coated so no glass fiber splinters. Nice point/taper. Drive cap fits to protect exposed end when driving. I used an earth drill to prepare to make driving easier.
Sandra M from Michigan
These posts are SO much better for temporary fences than the step-in posts you can buy in the farm stores. If you’re changing fence lines and removing tape/rope on a regular basis, the farm store posts end up with the tape guides breaking and making the post useless. For a comparable price (sometimes cheaper) these posts with four ScrewOn Insulators have lasted longer, are more adjustable and more animal proof than any step-in posts I’ve had. They are also much better for added support and follow ground contours on mesh fencing better than the farm store step-in posts. I like these so much I’m now using with the 1/2" posts on semi-permanent fence lines.
Matthew H from Vermont
The rods themselves are great, but the snap-on clips barely fit. It is very hard to snap them on to the posts. Once they are on, it is very hard to slide them up or down and some of them break in the attempt to snap them on.
Chris D from Arkansas
Great products and fast shipping!